Craftsman 8.50 Torque Rating Dual Rotating Tine Tiller "tines turn" Questions

...turn the tines by hand. If the they turn freely you most likely broke a shear pin that secures the tines to the axle.Clean the axle and tines and examine very closely for the pin.
If sheared ( ...

...turn but the tines do not. Are there shear pins or anything that would prevent tines from turning. Any suggestions? Yes, there are shear pins on the tines and on the wheels. Can you check to see if ...

...not turn tines are clear and free of debree..starts easy..but tines will not turn Find out what drives the tines ei...belt,chain ect... or is there any signs of locking pins missing?? Please rate Th ...

tines to turn, but with virtually now power - just setting them to the ground will stop them from turning...lift them from the ground and they will begin turning again. If clutch is released they will

...tines will not turn...why..Craftman 17in Model 917-294271 -Check the locking bolt that hold the tine shaft to the main shaft. Possibly it's broken. If so replace new bolt. you should be good to go ...

...turn, tines don't engine starts first pull These machines have an arm to activate the tines independantly from the wheels, make sure that the tine arm is in the on position. If not, seems like you ...

tines to turn. It jumps into forward without turning the tines. Check the wire to make sure that when you engage the tines it is actually engaging the lever. This seems like your are either low on the

tines turn clockwise, what can I do to rectify this problem? DEpending on the machine you can take the tines off and turn it around. The only other thing to do is get into the tranny and see why it is

...the unit sat for 4 years because the tines would not turn and your replacement engine has not solved the real problem. I'd say disassemble the chain case to discover what's locking the tine