Troy Bilt Pony 6.5 Hp Rear Tine Tiller "removing tines" Questions

Replace tine shaft oil seals - Junior model How do I remove the tine shaft oil seals on a Troy-Bilt Junior V (Mod # 15006, S/N M0104189)? The outside of the tine drive housing has a silver-colored ...

can not get tines off shaft ya you have to do that properly. Get the blow up diagram. but usually there are clevis pins that must be removed. I have a 11Hp Craftsman rear tine. Those tines are removed

tiller runs great just having a problem with the tines turning plowed my garden last week and for some reason the tines quit turning like its locked or something please help me Two possibilities. ...

tines I have Earthquake Mini Cultivator; engine runs fine but tines won't turn? Either clutch is bad or teeth are striped in bottom gear box. remove tines run engine and see if you can feel ...

I have a Craftsman 17" rear tine tiller with I have a Craftsman 17" rear tine tiller with transmission problems. I have disassembled the entire machine and opened the gearbox. However, the rear ...

Tiller tines will not turn. Engine runs fine... We;ve started the tiller this year and the engine runs, but the tines don't rotate..We've tried everything we know. Well hopefully it's not the ...

...TINES WONT TURN Make sure that the clutch doges as I call them are engaging properly. Also check rear tine gearbox for striped gears or sheared keys. To check some of these things it may be necessary ...

tines continue to work with out touching safety or throttle. they engage as soon as I start the engine. remove H (high) L (low) plastic caps to allow you to further adjust the flow and you will be ...

best way to fix the problem motor runs good, drive belt replaced already, when put into gear tines will not engage, how to remove rear tines and seals?? look on the shafts the tines ride on and see if

garden master tiller 5020d Looking for belts? Get behind the tiller as if you are ready to use it. Look down towards the tines. There's a protective cover. Remove it and you will see the belt running ...