Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin "stuck chainsaw clutch" Questions

Ad

Question about Poulan Garden

1 Answer

...chainsaw because the stud for the clutch brake housing has broken loose inside the housing. When turning the clutch brake nut the clutch brake stud just turn with the clutch brake nut. Need to know a ...

Ad

...for 2-3 years in parts i recently put it together and iam stuck with this problem the clutch facing are glazed we hope. take it apart and use a spray brake cleaner on it and let dry before ...

Ad

Question about Poulan Garden

2 Answers

...chainsaw shop. There are springs on the centrifical clutch that occationally get tired, the same place can determine if that is your problem and replace them or show you where they are located so you ...

Question about Husqvarna Garden

1 Answer

...stuck, even when clutch cover has been removed. I have removed the tensioner and cannot see anything wrong with it The screw may be cross threaded. The pinion gear could also be damaged. I would ...

...stuck in a tree. After freeing it, the clutch appears to be locked up. The chain moves freely on the bar when I remove it from the saw. Thanks Alan Make sure the chain brake isn't set. When you turn ...

...stuck on clutch. I pried the chain brake off clutch and removed the entire assembly. Now the chain brake is engaged and I can't install it back over the clutch. Quickest way to load it is to ...

...stuck locked to unlocked the easy way. ... BTW, I will NEVER sharpen a chainsaw again. This new chain ... How to assemble the brake spring on a 137 husqvarna ... ...

Question about Stihl Garden

1 Answer

...it out, it just slides into the clutc drum. It be stuck from rust, speay some WD-40 on it an let it set for a while, also try tapping on the clutch drum lightly with a hammer as you pull on the

Question about Garden

2 Answers

...chainsaw which will start but the chain doesn't move. Can you give me any advice on what to do? Thank you there might be a manual break on it either chain has come off drive sprocket or clutch is ...

...chainsaw seem to rev up without any resistance, or does it bog down as you push the throttle? If it revs up quickly, then it sounds like the clutch plates may be frozen - usually due to rust. If it ...

Not finding what you are looking for?
Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin Logo

546 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...