Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin "mean chainsaw carb adjustment" Questions

Ad

...carb it starts but shuts off hard to get started, is there a tool for adjustment If the adjuster screws have a spline rather than a screw driver slot, then the special tool is part no. 530035560, be ...

Ad

...adjustment carb screws all the way in. Then open them one turn back to start . Try to start the saw. Then make adjustments to the low adjustment screw. If any of these don't work try a known working ...

Ad

...adjustment needles out (counterclockwise) 1/4 to 1/2 turn Chain Saws: 5) check impulse tube and intake boot for cracks or leaks *if all of the above are OK and/or do not improve performance then: ...

...chainsaw wasn't running properly, yesterday I stripped it down to fix the oil pump, all went well. It starts first time, but runs very temperamental. Im struggling to get the carburettor adjusted ...

Question about Garden

1 Answer

...air and oil screws on the carb of the husqvarna C61 chain saw I presume you mean lo and hi speed screw. Not sure of Huskys but most saws suggest you begin with 1 full turn open and adjust from

CHAINSAW HAS BEEN SITTING UP REPLACED PRIMERBULB AND FUEL LINES. HOW DO YA SET CARB. You have to adjust the jets at 1.25 turns out.This means turn jet in until it stops.Do not force or you will damage

...carb a homelite super2 chainsaw when i give it gas it quits but will idle Check the fuel filter, air cleaner, and muffler for plugging. Inspect the fuel lines for decay/damage. Make sure that all of ...

Question about Poulan Garden

1 Answer

...for a few secs!) and then back the screw out until it starts to 'four stoke'....which means its cutting out slightly. On the low speed jet, you adjust right at the point where blipping ...

...carb Rebuilding it does not mean it is adjusted correctly but if you are confident with that I would check for air leaks in the hoses. Replace the spark plug or make sure that there is spark in the ...

chainsaw Carb adjustments The idle adjustment screw will probably have a spring on that screw and will push directly on the throttle linkage. You just adjust this screw until the engine idles like you

Not finding what you are looking for?
Poulan Wild Thing 2375 18" Gas Chain Saw 2.5 Cuin Logo

546 questions posted

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...