Electric Chainsaw Sharpener "wont cut sharpening" Questions

wont cut straight if the cutting plates are of different lengths or blunt, due to improper sharpening. Take it to a repair shop or a hire centre and they might put it right. You might be better with a

...wont cut straight. i have a husqvarna 350 chainsaw, it wont cut straight throuh a log without cutting at an angle and getting jamed. what is the problem , any sharpening tips THE ONLY THING THAT ...

...its edge your back will love you for it, and you get more wood cut. But if you dont sharpen evenly and at the right angles it can be as bad as hitting dirt because it wont cut straight and get ...

...wont stay tight Is the chain being properly oiled? Make sure the cover fasteners are tight after adjustment. If the chain is dull or is improperly sharpened, it will heat badly causing the chain to ...

...it wont move easy to mess up your cut , and last but not least , watch your chain oiler , most don't work too well pointing down , and keep your chain sharpened too makes for less effort from ...

...wont cut You may have the chain on backwards, check to see that the cutters are facing forward on the top of the bar. It may need to be sharpened. Normally, a loose chain will enhance it's ability to ...

...wont cut. take the 3/4 inch nuts off compleatly and hold the bar on so you can see how things should look. you can put 1 nut back on snug to hold the bar in position while you learn your way around. ...

...wont cut and smokes at chain little oil to bar and chain You need to clean the chainsaw areas where the dirt has gone with a water hose. You may have clogged up the oil thing that puts oil on the ...

my chainsaw will not stay running and gets hot and wont cut clean carb,sharpen blades,put chain oil in it

wont stay on Release the chain brake, then remove the bar and chain. Lay the chain out on a flat surface and look for damaged links, or sideways bending of the chain. Replace the chain if you find any