Makita BO5010 5" Random Orbit Sander "air working" Questions

...NO CORD??? Hi, If the product your have this listed under is correct then you need to hook up an air hose to this sander to make it work...it works on compressed air... ...

Speed Control Question do I need variable speed Control? When you are finishing the surface of wood, it's vital to maintain control. Work too fast or too slow and you risk ruining your hard work with ...

...air to get it going? Previously it was used on a 15 gallon compressor but not for about 15 years. The pad spins freely and it was working fine the last time I used it. Any idea what to do? I live in ...

...weak parts of the bag but I am not sure what the problem is . The fan works because I can feel the air flow out the dust tube. the inside of the tool is full of dust not allowing it to get into the ...

...Try blowing through the little **** that collects sawdust (inside back by belt) with a compressed air nozzle, with the bag off, and squeeze the trigger and let the motor run a little. Blow out the ...

Air and dust no longer blow into dust collection bag. I suspect that there is a clog somewhere. are you putting holes in the papper with the guide? there has to be holes in the paper for the dust ...

...and found the bearing needed to be clean with super penetrating lubricant PL-100, then blowing air. Now ,work like a new ...

... I didn't quite understand the fix you suggested... Blow into the dust exhaust port with compressed air? Remove the dust bag and unplug sander for now. Everywhere you see an access hole (fan area, ...

...working. The air simply comes out of the bottom of the sander through the filter. Any suggestions? the units gummed up from the air,get a can of air tool oil and pour it into the air hose inlet,then ...

Dewalt air Palm sander, just bought and tried it a couple times and worked just fine but when I hit the trigger about the 5th time u can just hear air coming through the sander the vanes in the small ...