Question about Coleman Electrical Supplies
...gen engine running, 1) plug a 3/8 drill into an outlet, (make sure the drill is set to the forward rotation) 2) hold the trigger in the run position 3) by hand, rotate the drill chuck with a quick ...
gen-set that it works for 2 to 6 hours then it shut off alone then i turn it on again and i dont no what to do i check all of the engine and sensors but there is nothing wrong motor wont start back or
...2 years. Okay, this is going to sound kind of hard but you can do it...you need to flash the field and try to get some 'excitation' back to the windings. It's a bit of a deal but here's how: With gen ...
Question about Coleman Electrical Supplies
there and usually has a 1/2 " square head plug. The oil drains very slow thru that hole. Some gen sets had a small tube (4 - 5 inch ) attached to drain hole that made it easier to catch oil. Good luck
gen. about 1 1/2 years ago. i never tried cranking it till about 6 mos. ago. it would not crank until i took the breather cover and filter cover off and sprayed starter fluid in the carb, then it wood
...gen was taken out and given to me because is ten years old starts and runs fine but only makes 97 volts wondering if worth fixing or even trying to It could be several things but it sounds like it ...
gen head there ready avail and cheep about 5 bucks and can get from radio shack the numbers can cross reference easy some times there is 2 of there change them bolth they pop easy with a hard surge is
...gen purch 2yrs ago,used then,for 3 days,fortunately haven't had to use since.ran it last yr w/gas stabilizer,shut off gas,let it run dry,then drained tank completely (tank is plastic so i'm not ...
849 questions posted
Usually answered in minutes!
549 Questions
64 Questions
57 Questions
47 Questions