Yamaha 2500 Watt Industrial Inverter Generator YG2800i "runs choke dies put" Questions

the engine dies as if you put the choke on. If you put a rag over the front of the carb intact the engine runs a lot better Float is not sticking and needle valve has been checked Check the air filter

...choke in, it revs up, then nearly dies, then revs up etc, until it does finally die. Any ideas on what the problem may be? It is starved for fuel. PROBABLY needs to have carbureator cleaned and ...

dies when I increase the RPM. What is the initial setting for the ''non-adjustable'' idle screw? What is the initial setting for the throttle linkage? What is the run position for the throttle linkage

...runs good in the choke position, however when you try to take it from choke to run, it dies. Will it do any damage to the unit if I put a load on the generator while in the choke position? Not that i ...

Runs on choke only Motor will only run with choke on only. As soon as you switch the lever over to run, the engine dies as if you put the choke on. If you put a rag over the front of the carb intact ...

...runs great until a load is put on it. Then is starts surging and eventually dies. I put a new carb on it. Camping World adjusted it and told me the choke wasn't properly adjusted. I don't think they ...

...runs with choke closed/air restricted New generator, purchased last year, used for the first time this weekend. (Major Ice storm in NH) It starts and runs with full choke, but dies with choke off. It ...

...put it all back together. now i cranked it with full choke and it would crank for a second, then i open the choke, it would die, would not stay running on choke either. but after taking off carb. i ...

...dies and it will not start again in till it sets for 30 minutes or so then it will fire right up please help!! Maybe faulty CDI ignition module ? There are a number of components ( electrolytic ...

dies. So, I took the cover off, the one towards exhaust side and was able to see carburetor. There are two screws with springs on them. I guess these screws control fuel and air for carburetor(you can