Dewalt 5" random orbital sander (DW421) comes to a complete stop when it is under load. Is this repairable? Seems time for a new sander.
...sander model 333 is spinning out of control. What do I do? I may not have the whole picture, but all random orbits spin wildly if they are not pressed onto the wood a little. Do you mean it is not ...
Question about Festool Tools & Hardware - Others
...orbital sander has suddenly omitted a puff of smoke from the top and has stopped working If you have shorting again by trying replace the capacitor but if it is not working try to turn a little the ...
Question about Porter Cable Tools & Hardware - Others
sander suddenly stopped orbiting. It now only spins at high speed, causing burning and grabbing There's a belt in there that may have broken or slipped off its track. That's just about all that can go
...sander is on. Is this repairable and if so, does it make sense to repair or do i have to purchase a new one? If it is repairable,can you give me any idea of the cost. Thank you Paul Landsman if this ...
Question about Dewalt Tools & Hardware - Others
repair it your self except for this As part of CFS (Controlled Finishing System®), your sander is equipped with a replaceable disc (F) which is located between the pad (C) and the sander body (G)
...orbital cam which is on the flat plate that you connect the sandpaper to , either the shaft or the bottom cam is broken [probably the shaft has snapped ] you can do a cheap repair with a good glue to ...
...sander powers up fine but as soon as its put under load, it slows to almost a complete stop. it was working fine and then it wasn't. i checked the brushes and they seem to be fine The armature ...
...front of the sander, to keep the sanding pad spinning. Does this sound like something that can be repaired? If you go on a Bosch factory web site you should be able to enter your model and down
1 questions posted
Usually answered in minutes!
42 Questions
31 Questions
30 Questions
24 Questions
10 Questions