Question about Fellowes Office Equipment & Supplies
paper does not go through the machine either. Can you actually see the cutter blades rotating? I have seen gears broken and you can hear the motor running but no blade movement. Remove the screws lift
...blades to become misaligned which in turn puts additional stress on the motor and will mean that you will be able to successfully shred less paper than if the blades were OK and in good
Question about Techko Office Equipment & Supplies
...the paper is put in this lever is between two cutter blades and is easily jammed in the on position from paper bits remover any paper around the center of the shredder that is blocking up the ...
...cutter blades pulling out the paper Does the shredder have a reverse button ? If it has, just switch between reverse and forward a couple of times. If that does not work it may have to be dismantled ...
blades on my shredder? The paper goes through it. but it doesn't shredd the paper like it is suppose to Try running a layer of aluminum foil between two sheets of paper. See if it shredds, If it does,
...and poke at any compressed paper wrapped around the blades - can take a while. Give a quick spray to cutters with WD40 Replace - turn on - and run in reverse. If all else fails, contact the ...
Shredder wont shred. It has power but the cutters wont turn. the cutter wheels are probably filled with paper shreads, you need to unplug the shreader and clean the blade by hand
...paper is inserted You can oil the cutter blades by taking some 3 in 1 light weight oil and soaking a couple pieces of paper and running it through your shredder. This also keeps the blades sharp and ...
Question about Omnitech Office Equipment & Supplies
...paper is stuck and that lever is now not operating the microswitch to drive the cutter motor either that or the lever has broken off, again not activating the micro switch If you want repairs or ...
shredder blades not turning A staple or paper clip has jammed the cutter blades. If there is a reverse switch then reverse to free the cutter blades and remove these objects.
86 questions posted
Usually answered in minutes!
20 Questions
12 Questions