Coleman Powermate Premium Plus 6250W Portable Generator "replacing engine generator" Questions

Ad

Question about Coleman Electrical Supplies

2 Answers

it does work. I had to tap the end of the rotor as shown in the video. The tap might not be the 3/8 size so you should verify the size. My generator's engine thew a rod after Hurricane Issac.Good luck

Ad

Question about Briggs & Stratton Electrical Supplies

1 Answer

where can I buy a replacement engine? where can I buy a replacement engine for a model #01815 briggs 12kw generator? The engine family is 1BSXS6272HW go and have a look at smallenginewarehouse.com

Ad

Question about Coleman Electrical Supplies

2 Answers

Replacing engine on Powermate 5000W Generator My 5000W generator has a 10 hp engine that needs to be replaced, can I use an 8hp engine from a 4200W powermate I would say, yes (given everything bolts ...

Question about Coleman Electrical Supplies

2 Answers

...they seemed ok then replace AVR card Check you throttle. You wount have any power until the generator spins quick enough the self excite/ start generating. The engine schould run at 3600

Question about Groove Tubes Electrical Supplies

1 Answer

...and it's leaking oil from I don't know where. Can you help? usually its the seal were the geny joins the engine u will need to separate generator from engine check the seal and replace with new

Question about Coleman Electrical Supplies

1 Answer

Coleman generator OHV3000 Not a 6250 generator but a 3000 watt generator. The engin surges high and low rpm. Will not run at a steady speed.governor keeps moving and engin surges. This is with no load

Question about Coleman Electrical Supplies

1 Answer

...part or carb kit. May be easier to take the engine information to a mower repair shop in your area for a replacement. The engine on your generator is similar to one used on lawn equipment. Good ...

Question about Groove Tubes Electrical Supplies

1 Answer

...from the unit but don't know where its coming from. check at joint between engine and gen, its usually the engine oil seal need replacing u will need to split engine from gen, and replace the oil ...

Question about Briggs & Stratton Electrical Supplies

1 Answer

the engine needs to be replaced can it be done or the generator done for the cylinder wall is mess up and throws oil out of engine Look at eReplacementParts.com and the parts diagrams

generator that had it's engine cease after the last power outage. We had an oil leak fixed, but this didn't hold. Is there something wrong with the engine gaskets on the Storm Responder generators? We

Not finding what you are looking for?
Coleman Powermate Premium Plus 6250W Portable Generator Logo

696 questions posted

Ask a Question

Usually answered in minutes!

Top Coleman Electrical Supplies Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Coleman Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...