...cvr kickers 4 10 inch cvr 2ohm dual vc how to wire for 1ohm Option 1 (series/parallel) = 1 ohm load Voice coils wired in series, speakers wired in parallel Recommended Amplifier: Stable at 1 ohm ...
...wire a 12 inch kicker CVR What's the best way to wire a 12 inch kicker CVR Ok, first you need to have at least ten gauge wire cause the amp needs agility of juice. Next you want to find a good ...
...inch cvr to 1 ohm Hello juanelreypla, If your CVR's have dual 2 ohm voice coils, they can only be wired for 0.5 ohm, 2 ohm, or 8 ohm final loads. ...
Question about Kicker Car Audio & Video
inch cvr's arent hitting as hard as they should I have two kicker comp cvr's running on a pioneer gm-5500t amp and a 680 watt wiring kit and its not pushing as hard as they should. I bought these subs
...wire 2 15 inch cvr to a zx1000.1 amp at 2 ohms If they are 4 ohm single voice coil subs, just connect all the negatives together and then all the positives together. If they are DUAL vc's then need ...
...wire 2 12 inch kicker cvr depending on your amp, you can bridge by connectiung the speakers + to + and - to - and connect to amp using left + and right -, unless otherwise noted on amp. Please give a ...
wire four 12 inch kicker cvr dual voice coil, to a 2400 watt 1 channel class d amp Hello brysonford00, The wiring configuration depends on what final impedance you want the amp to see. If the subs are
...inch subs, 2 of them are dvc 4 ohm and 1 is dvc 2 ohm, the amp that i am using is jl audio 500.1 1.5-4ohms stable. can anyone help me? if the amp has a 2 outputs then i would wire the two 4ohms ...
...inch kickers cvr and i have the rockfordfosgate g15002 hooked up and briged and it keeps cutting off This is usually due to wiring the subwoofers to the wrong Ohm load. Normally those amps are rated ...
11 questions posted
Usually answered in minutes!
174 Questions
102 Questions
72 Questions
42 Questions
48 Questions
