Goldstar DH3010B Dehumidifier "replace fan motor" Questions

...the lines up with shafton motor ifit is round your should replace fan blade unit. i could not find one so i pushed tooth picks in between shaft an fan and glued them has worked for a couple months ...

...replace the electric fan motor. I have a AMCOR SD10 Dehumidifier, and the electric fan motor has burnt out. Can you advise how or where I can obtain a replacement electric fan motor. Many Thanks ...

...also check the motor by rotating the fan. If it rotates with resistance the bearings may need lubrication. If it is a sealed bearing motor and no points for lubrication are there, replace the

...fan motor is quite hot to the touch when it is running and the smell is like something burning and the fan blade isn't rubbing on the housing then the fan motor bearing are most likely worn out. If ...

fan motor for ebac homedry 880 dehumidifier. fan motor Mod No aa2c6235 Hi, If you are in new Zealand and your 880 model is the NZ 870 model, the fan motor can be got at Carrier Air Conditioning, part

...fan blade to see if it spins freely. If it doesn't spin freely, (there appears to be a little drag when you spin it),the bearings are bad, if it does spin freely, then try moving the motor shaft from ...

...fan motor or capacitor. Shut the power off to the unit, spin the blower wheel to see if it spins freely. If it doesn't spin freely, (there appears to be a little drag when you spin it),the bearings ...

Fan motor making squeaking noise; sounds like bushing failure. PLEAS IF SOUND REALY FROM THE MOTOR SOME OF THE MOTORS HAVE BEARING CAN BE REPLACED BUT IF IS BUSHING BETTER TO CHANGE THE MOTOR. Spray ...

...fan motor. Last week the fan motor on my Wood's dehumifier burned out as a result of a completely plugged air filter. I replaced the motor last night. I turned on the dehumidifier and let it run for ...

...fan motor operates on standard 110v household current... you can test the motor by hooking an extension cord with the female end cut off and the 2 wires stripped back 1/4 inch to the black and orange ...