Vestax Vci 100 Midi Controller "usb port" Questions

fried the power pins on the USB port you used to connect the 4 port hub. If you can get the hard drive to work separately on the USB port, the 4 port hub may no longer be passing power from the laptop

usb port replaced on my vestax vci-300. Can you help? The electronics of a USB port is fairly robust. Why do you think the USB port needs replacing? Or do you just mean the connector... Even those are

...USB or MIDI OUT port. For my M-AUDIO oxygen 61 (silver), I must press the [Advanced] button then Note F3 on the music keys manual to toggle the MIDI-OUT. If set to INT, it will not sent via USB. If ...

...usb port, My cat yanked the cable out the back and now the USB port is broken. I got some soldering experience. Just want to know where to get a compatible replacement port Try a local computer shop ...

...In Controls OUT Port = Axiom 49 Hypercontrol Out if it hasn't detected yet then restart Reason. Make sure the power on the Axiom is on. If you still have issues the USB port on the Axiom could be

...slower, but dedicated DEVICE port on the rear. The device port is a USB1.1 port but you can insert standard USB thumb drives formatted in FAT to this port for added storage for your samples. Cheers! ...

...USB port works by plugging in a hard drive or something thus proving you have a good port and USB Cable. At which point hook the keyboard up ( and make sure to properly install drivers provided on cd ...

...usb port in the back of it has broken. I see that it has a midi cable port in the back of it. I need to know if i use a midi cable and plug it into my mpd26 would it work. I am using fl studio 9 and ...

...USB port on a midi keyboard? If the port is still intact then it might just need to be resoldered. USB ports however to get strained and basically fall apart. Purchase another and solder it to the ...

...USB port (proofed) and "nothing" Please I´ll appreciate any help from you. Thanks Severiano Do you have alot of drives connected to your PC? You might need to go into disk manager and assign the ...