Troy Bilt 17 Inch 29 Cc Gas Powered Clutched Curve Shaft Trimmer #41ADT52C966 "edger blade turn" Questions

...edger blade This edger has no markings of a manufacturer. It has a fan belt that turns the blade shaft. When I try to loosen nut, blade spins. There seems to be no way to loosen nut. The edger I had ...

...edger blade does not turn. Motor runs Ryobi 775r edger blade on attachment does not turn. Motor runs fine. Have you made sure the drive shaft cable is tuning and is properly installed and that there ...

...blade for our craftsman edger Go to www.searspartsdirect.com. Put your model number in of your edger. It will show you a parts list , which will include your blade. Hope that helps. Good day. sears ...

blade removal I have been unable to get the nut off the edger in order to put new blades on. Which way is the nut supposed to turn. i have a troy built edger 9hp. walk behind edger. seems to be locked

...blade drive belt on your MTD edger makes a half twist in its pattern. When the belt was installed, it was twisted the wrong direction. Remove the belt from the blade pulley and reinstall with it ...

...edger blade how to change the blade Start here to find User's Manual.  Sometimes the nut/bolt holding the blade on is a Left Hand thread and requires CW turning to loosen and remove.  ...

...edger blade bolt I have a craftsman edger and need to change the blade on it. For the life of me I can't get the blade bolt to budge at all. I've tried WD-40, have tried putting wratchet on bolt on ...

edger blade quit turning was working fine then blade quit turning remove and inspect blade for damage. if all is well check flex shaft conection, may have damaged the inner flex shaft or the ends to ...

...Edger Blade When I try to remove the blade on my edger by turning the bolt that holds the blade, the blade rotates and is impossible to hold down. Any ideas on how to keep the blade from moving? you ...

...edger how to change blade hello, To keep the shaft or trimmer head from turning when trying to remove the bump knob or blade insert a screwdriver in the slot on the other side of the head and remove ...