Peavey 32fx USB 32 Channel Mixer "trs connector" Questions

what is proper wiring from crate cfs3 3-button footswitch to crate cx130 amp Its a TRS to TRS cable (stereo connectors)

...TRS connector for each channel into the INSERT jack for the mains in the area above the effects unit.  Plug the TIP of each channel of the snake into the input of your effects unit and the RING ...

TRS type cables where the "ring" of the connector is the send to the effects unit and the "tip" is the signal FROM the effects unit. Not all effects units have a TRS connection and they have only in's

it must play , how to repair this unit VU light from the mixer mains output u should have  two TRS jack output terminals or  XLR type (round socket with 3 little holes)  (sometimes they

...TRS (balanced connector) You should find pin 1 of the XLR to the sleeve of the TRS. Pin 2 of the XLR can connect to either the tip or the ring of the TRS and pin 3 of the XLR to the other TRS tip or ...

...with power amp to my fx 8. what are the connections? Balanced audio interconnects (either XLR or TRS cables from the mixer and then balanced audio interconnects from the amp daisy chain inputs to ...

...TRS connections and the signal is being carried on the RING of the TIP-RING-SLEEVE connector. Plugging in half-way the TIP touches the ring pickup contact. The emgs one MAY use TRS type cables and ...

...and eq overall mix. Thanx You need to make special cables. The inserts send and receive via the TRS connectors. You will connect to the preamp output of the insert plug which is the "RING" of the ...

...connector. Must the 1/4" be TRS or will TR work just as well? Need to know which adapter to purchase??? You should use TRS since that is balanced just like XLRs. Especially for long wire runs. ...

...1604 vlz3 and am trying to figure out where all the parts and wires go to and how do i know if a trs is required or just mono ect... i have a compressor/effects/bbe/wireless mic/ in the rack. ...