Peavey 32fx USB 32 Channel Mixer "sub signal" Questions

signal for all the sub groups when group button is selcted but, no audio. I now only have audio to the mains out. I noticed a restore in scenes but I'm not sure that it's settings are now also

...4. Anyone have ideas on where to start diagnosing the situation? send a signal thru the sub 4 insert and see if it comes out the sub 4 output. You may have jarred a ribbon cable loose in

Sub Out 1 and 3 not sending signal to amplifier. Sub Out 2 and 4 are working sounds like a blown output transistor

signal still passes through the FULL RANGE and HIGH PASS outputs but no sound comes from the 18 inch sub. I have to power off the 1801 for the red LEDs to turn off. Thanks! These subs are renowned for

...sub. For mono's, the left channel is the one used. Refer to the signal flow diagram for the Mackie mixers to analyze this. It probably is on page 28 of your manual. For the subs, you can pan AT THE ...

...SUB. Getting power and signal light flashes when theres a signal. Just no sound??? Speaker/coil looks fine.. There's a 8-pin ic located right at the side of output devices & power supply filter ...

take mixer main out to sub, if mid top output then mid top to that, if only pass through then either full range to mid top from there or probably need crossover in signal path to split the frequencies

We have the jbl eon system. Our subwoofer (518s) is having issues. It will turn on, recognize a signal -even limit a signal, but No sound comes out First thing is to use an ohmmeter to check the voice

...sub woffer crossover via the main inserts using the proper insert cables. System works great, however when Using a CD player the subs will not work. any suggestions? Sorry, I have looked at the ...

...signal for the tops. Check your sub specs or manual. If your subs have this, run your output signal to them first and then link them to the tops from the special daisychain socket. If they don't ...