Peavey Pv 2600 Power Amplifier "connecting behringer mixer powered amp" Questions

...behringer feedback destroyer to a powered mixer In order for this to work properly it must be inserted between the last pre-amp stage and the power amp. Can you please update this with the mixer that ...

...Behringer UB2442fx-PRO run 2 main PA speakers plus two passive stage monitors without blowing up? ALL the speakers will either have to be POWERED or have external amplifiers. The mixer has NO power ...

...mixer to a Behringer B215D Powered speaker Looks like both units accept 1/4" jack & I think the 1202 is unbalance out, so just use a standard screened mono (i.e. 2 pole "TS") jack to jack lead ...

...behringer XENYX 1204fx mixer, / peavey pa-400 system, / windows xp desk top, all work together as one,but my brain is not working with me. So , my brain and i need someones better brain to help me ...

...mixer to a crown power base 2 amp and speakers just use the main left and right outputs of the behringer to run xlr (3 prong balanced) to 1/4 inch (looks like a big headphone plug) cables into the ...

...behringer 15 band graphic equaliser and connect it to a numark 5000fx mixer via skytec pro600 power amp can you help. The signal path to follow is explained below: *Audio Source(Cd/LapTop/Ipod)output ...

...mixer ( behringer europower 500) Using TRS (balanced audio interconnect cables) go from the main output on the top of the panel to your amp inputs. MAKE SURE the amp is powered from the same ...

...Behringer XENEX 1202FX mixer: Since I need powered speakers, do both speakers need to be powered or just one, with the other speaker being passive and connected to it? powered , or you could buy and ...

...connecting external power amps. However, the PMH5000 does have two "main out" jacks that can be used to send the mixed audio signal to external power amps. These are typically located on the back of ...

mixer itself. In my experience with powered Behringer mixers this is just the way they are. To be safe check your speaker impedance is not less than 4 ohms per channel & if you are using one 8 ohm