Samsung LN52A650A LCD TV "power red light blinking" Questions

power light blinking red, keeps poping up what the tv can do on the screen ,can't control any funtions How many times this standby/power light blinks at one time switch ON?Count it carefully.These ...

Power light blinking red Model Number: LC19SB24U, Serial Number: 805908690 No power, Power light just blinks red and nothing else happens? The tv is NOT in standby mode... it does not have a standby ...

...red light, no video I work in an electronic repair class room and I?m trouble shooting a Samsung LCD TV model LN40A530P1F and I believe it is the power supply. I am familiar with underrated 10 volt ...

not turn on or off. Red light Samsung LCD TV will not turn on or off. Red light keep blinking on and off hi, your lcd ip board (power board) capacitor had already exhusted. got to replace the ip board

red light is blinking showing it's receiving the signal from the remote or power button on the side of the tv. Replace the power supply board the blinking power indicator is usually indicating

What does four blinks suggest on a LN-S2651d? Replaced caps on power supply but picture still gets white snowy picture after warms up. red light blinks 4 times Take it to a repair shop and ask them?

...red light on the power button just blinks and then clicks. Please help. Your LCD has gone bad or their is a high voltage problem that powers the LCD. Usually a inverter board. Try leaving the TV ...

red light blinks a few times when i plug it in. and when i press power it blinks once. but will not turn on. i checked the two fuses inside and replaced them but i red light blinks for about 30seconds

power on the red standby light is blinking and about one to three times i can hear beeping. After a couple of minutes the screen flashes on with audio for a second and then shuts off and then a minute

...power up. I have a samsung LN40A630. Backlight doesnt turn on, and the red light blinks intermittently. All of the capacitors on the PS board are metering at proper voltage when I apply AC power to ...