...then press and hold the VCR button on the remote for up to 10 seconds.that should do it. Steve L From the DVD-VR325 manual... ? Key Lock Function If you do not want others to operate the DVD ...
...key and the #3 key down together for about 10 seconds while remote is pointing at dvr....the remote should reset and in setup you should be able to change to dv3 Dvd player/ recorder stuck in DV ...
Question about Sony Televison & Video
...remote that work are the channel up & down and the volume buttons. I tried to reset the recorder by holding the on/off key down dor 10 sec. until the display stated Sony DVD, this didn't reset the ...
10 seconds helped get the VCR restarted from "safe" on the readout Yes, this fixed it. There was a button on the remote that said "child lock" that I pressed to fix this. YOUR CHILD LOCK BUTTON IS ON!
...remote) and press and hole the STOP botton for like 5-10 seconds. thank goodnesss!!!!!!!!!!!! your welcome! :]] My brother came over to "help" me and we put on the progressive scan...then no picture ...
...remote and did nothing. Try unplug,replug the unit back an hour later,should have everythings,reset to Factory setting.If no,electronic component's parts burn in ur device. Press Program up+down ...
...10 But theres a 99% chance that you're stuck in the initial setup mode(have you just puirchased it?) - if you wish to skip this setup press- > enter > return > enter - on the remote panel, make sure ...
...remote to key in a 2 number value. You can usually return back to the "Service Mode" by entering "00". If you get stuck, hold the power key for 10-12 seconds or until the unit shuts off. Try to avoid ...
...10 even if you have to buy a new solder iron - less than $4 if all you need are the capacitors! Thanks for the instruction. After replacing 6 damaged capacitors, my DMR-E85H is up and running and I ...
228 questions posted
Usually answered in minutes!
1,031 Questions
445 Questions
373 Questions
357 Questions
327 Questions
