Question about Royal Office Equipment & Supplies
... the shredding mechanism, which has many parts, some of which are sharp as razors, might need to be disassembled and cleaned. Though I did that disassembly and cleaning, I would not recommend it to ...
Question about Office Depot Office Equipment & Supplies
...grind metal and it will not take the paper. sounds like the shaft has slipped off the bearing end support. disassemble and make sure end plates/bearings and shafts are in proper position, and try ...
...NOT COME ON IS THERE A BUTTON I HAVE TO PRESS OR ANYTHING Do NOT attempt to switch it on while disassembled! Put it back together and it will work if you cleared all stuck paper. There's bin ...
Question about Royal Office Equipment & Supplies
...disassemble to remove paper glued to the mechanism, I have removed the 3 screws, does it just pull apart from there?? I've been using Tweezers to remove the paper from each end but the paper is like ...
Question about Royal Office Equipment & Supplies
...the paper in the slot, but won't pull it through to shred. must disassemble feeder unit. you will find many bits of shredded paper to pull (push) out with a long narrow tool like a crochet
Question about Tech Solution Office Equipment & Supplies
paper but does not shred completely You need to disassemble the unit and then sharpen the teeth of the shredder. Use can use sand paper, one by one sharpen it until all the metal teeth of the shredder
...for buildup of paper in the cutting cylinders and strippers. If you are technical, unplug from wall, disassemble top cover and clean all the debris. Check nylon strippers (white plastic) for
Question about Fellowes Office Equipment & Supplies
which feeds paper in has gotten affected. With the unit UNPLUGGED try looking to see if some paper has gotten wedged in there. If you can disassemble it you might be able to see the problem. Good Luck
...the machine. Clean the optics in the center where the paper goes in. If you haven't disassemble the top cover, chances are the optics have oil on them or there is some paper debris blocking the
Question about Fellowes Office Equipment & Supplies
...a brand new shredder. At first, I cleaned the sensors several times and it did not work. Then, I disassembled the shredder head, removed the two sensors, cleaned them with a wet cotton towell, put ...
132 questions posted
Usually answered in minutes!
40 Questions
18 Questions
7 Questions
4 Questions
1 Questions