InFocus Projector Lamp for IN24+, IN26+ "shutdown" Questions

...one I've worked on many times and you are correct. The lcd panels are burnt probably due to a hard shutdown not allowing the fans to cool the inner components done repeatedly over several

...get to the filters??and there are filters because it says on the screen check filters before unit shutdown THere are no filters for the IN24 its a DLP and most dont use filters. Ive had mine apart ...

...( If you still have it !! :) You may have replaced the lamp but not reset the counter and it has shutdown because the counter has reached a critical umber of

Lamp problem When initially turning the projector on the image is clear and visible, however within 1 minute the screen just goes blank and the lamp warning light flashes. You can restart over and ...

...do. If the filters are some what clogged then it may not be cooling good and tripping the thermal shutdown. Projectors use high power bulbs that get SUPER hot and they use a thermal sensor above

...the unit just shut down. Reading the manual it requires a reset of lamp runtime hours,as it shutdown itself we missed the corridor for this reset. I have replaced the lamp and powered up the ...

...and then shuts down after genuine Benq lamp replacement. Picture flickers colour just before shutdown. Lamp timer has been reset to zero. I'm sure the lamp is okay as I have tried it in

...in yellow occasionally upon start up. Last night it changed to a red "change lamp" annunciation and shutdown the projector. Thanks Reset the lamp timer. 1,Connect the power cord. 2,While ...

...hour? The unit has been thoroughly cleaned but shuts down after 1 hour of use. works fine up until shutdown. When switched back on the lamp will not illuminate but you will hear the fans kick in. I ...

Projector M300W don' t display on 1 mnt shutdown automatic Have a nice day! We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel, motherboard, powersupply ... with ...