...replace drum unit".....YES | NO? press "1" to reset. after it says "accepted", close cover. Please rate me :) I left the cover open and pressed the option button. At that time I received the message, ...
Question about Minolta Office Equipment & Supplies
...Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one. I still receive the error message "Replace Drum", "Drum End Soon", ...
Question about Dell Office Equipment & Supplies
...Replace Drum Cartridge" Can I reset the message "Replace Drum Cartridge" in laser printer dell 3100cn? Yes, you can but if you don't replace the drum the message will pop up again. You have ...
...Replace Drum" message won't go away The machine was beeping and the replace drum message was showing, so I replaced the drum and cartridge with new ones. Message came back within an hour, along with ...
Question about Minolta Office Equipment & Supplies
...instructions listed below. Open the front cover. Press the Options key on the control panel. The display will show "REPLACE DRUM - 1.YES 2.NO". Press 1 to reset the drum count. Close the front
Replace Drum Drum End Soon Drum Near End Drum Stop To clear these error messages, you need to reset the drum counter, Or Visit official Brother Printer website For Brother Printer Troubleshooting Page
...Replace the drum unit and toner cartridge into printer. 3.The error message "Change Drum Soon/Drum end soon" will continue to appear if the drum counter was not reset when you replaced the drum unit. ...
message received drum life end soon what does it mean? The message means the imaging drum is going to need replacement soon. The imaging drum and toner cartridge are the two main parts that need ...
...Replace Drum? just answer yes. The imaging drum is a consumable on these machines and there is a count down of pages printed until the drum should be replaced. The 'Replace Drum soon' message is just ...
...replace to reset the drum counter. (fuse blows to reset the drum life setting) Try upgrading a firmware, Else contact service center to reset the drum counter ( get the program to reset or visit them ...
32 questions posted
Usually answered in minutes!
106 Questions
93 Questions
72 Questions
71 Questions
72 Questions