Samson Audio C01upak C01u Microphone and Podcast Pack "connecting mic amp" Questions

Ad

Question about Behringer Music

1 Answer

mic. if I need to use a pre-amp, how would I connect it? It's the europower pmp3000 Thiis amp has plenty of gain for mics. Make sure your mic has a good XLR to XLR cable (balanced) and connects to the

Ad

mic input on the sound card if you want to broadcast. But if you just using this for like a dj setup all you need to do is take the output from you soundcard into the inputs on this.. Then if you want

Ad

...Mic plugged into is set at a somewhat "normal" position, you might have a problem with the mixer itself. In my experience with powered Behringer mixers this is just the way they are. To be safe check ...

...Used as a mixer it is fineand would support up to 4 mics. It does have phantom power for use with condenser mics if needed. Please use balanced lines (TRS) when connecting to the external

mic) Please how do i integrate these new equipment into the old setup for best vocal sound. Am I missing any device(s)? Thanks in advance Watch your impedance, when you add speakers the impedance will

...mic 200 it works on my mates lap top but not mine. Make sure the 48 volt phantom power is on. Remember this preamp has TRS BALANCED output. If you run this with a stereo adapter into your laptop, the ...

Question about Behringer Music

1 Answer

...amp "insert" or the insert for the mic you want it on. Looping it out on multiple mics would be tricky, but you could send the units effects into one of the monitor outputs only by selecting a ...

Question about Behringer Music

1 Answer

hook up eventide harmonizer to the pmp 6000 There are many models of the Eventide and how to hook them up will vary and depend if you have multiplle mics that are to be serviced. If you have multiple ...

...amp out" to PA or put a mic in front of it from the PA. If you don't use an amp, it can plug into the PA but, you would only hear the 8 pieces together and have no way to hear yourself

Hi, How do I connect a powered subwoover to my PMP 6000 when i have connected 1 pairs of passive speakers to Output B and 1 pair of passive monitors to Output A . Ampmode switch set to Monq1 and Mono

Not finding what you are looking for?
Samson Audio C01upak C01u Microphone and Podcast Pack Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Samson Music Experts

Lawrence Oravetz

Level 3 Expert

10548 Answers

Vernon Taylor

Level 3 Expert

7431 Answers

rhodesworks

Level 3 Expert

3157 Answers

Are you a Samson Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...