Question about Panasonic Office Equipment & Supplies
light flashing RED than lamp circuit failure, or abnormal function or lamp unit is damaged. In this case projector doing the same behave just like your projector. if TEMPERATURE indicator illuminating
...light turns red and the temp light blinks red. I have checked the cleaned the air filter, but I still can't get it to come on. Any suggestions? Hi, if the Lamp error and Temperature error lights are ...
...red light Sometimes when I start up the Cinego, the projector's power button immediately or within a few seconds starts flashing red. Other times it will interrupt itself while projecting, switch off ...
...red status light This project has a flashing red status light and no lamp The projector will turn on and the start up process is normal until the light should turn on. Then status light which started ...
Question about NEC Office Equipment & Supplies
...red status light on NEC VT45 projector There is a flashing red light on our school's VT45 projector. The lamp has been replaced but the flashing red light remains. Any suggestions to try? make sure ...
...light turns red, and the power light flashes red. Nothing is projected. I have contacted Hitachi, and was told to replace the lamp, and did so, but this did not fix the problem. Do you have any ...
...red light Last night my xr-10x-l worked fine Shut down fine as I remember? . To day all I have IS A flashing red light. I pulled the bulb it looks ok checking it with a meter it shows open? Does this ...
...Red light flashes then goes green. On/off button is pushed, red light flashes, fan runs then unit switches off (on/off power light goes to constant red). With the lamp blown, will I be able to get a ...
red light flashing Power light is red, temperature light flashing red. Hi Michael, There could be a number of causes starting with a clogged cooling channel. If you have not had your projector ...
...light both flash red, this indicates that the projector is overheating. Once the projector has cooled down the warning light would continue to flash red and the power light would be solid red. You ...
19 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
454 Questions