Question about Heating & Cooling
...furnace. I noticed a red LED light stays on continuously. I checked fuse on board and it's okay. I don't know anything about furnaces and don't know what to do. Can you help? turn power off for 5 min ...
...furnace Read one LED flash that stays on continuously to mean your furnace has no signal coming from the thermostat and will not operate. Turn the power off and check the thermostat for improper ...
Question about Heating & Cooling
furnace is working but the led light will not stop flashing, is it suppose to keep flashing. It's a day & night furnace, model #N8MSL/N8MSN PS 80. it's blowing Hot Air fine, but the LED light will not
...furnace ignite?? your system may not have been lighting and has gone into ignition lockout count the codes of the led lights then remove panel led diagnostic codes are listed there. if led codes ...
...furnace tries to light, watch the LED for blinking. Hopefully it will give a code other than 1. Try checking the air filter for blockage, make sure all hoses are free of moisture and any drains are ...
...led light at the furnace, and it is blank, it should have a 3 to 5 amp fuse that plugs into the board. Pull it and check to see if the metal element is blown or burnt. If so, replace it. If you are ...
...furnace room to make it easier to see the flashing LED. See what pattern the light is flashing and look it up in your owners manual. It's usually something simple, like no power (the light doesn't ...
power LED blinking 5 times,compressor not working? power LED blinking five times.compressor not working.whats the problem? is the LED light blinking on your furnace board?
furnace the red light is blinking. What does that mean? it is a diagnostic led light count the short and long blinks. Write them down!!! than remove that panel with 5/16 inch nut driver and there is a
70 questions posted
Usually answered in minutes!
347 Questions
334 Questions
307 Questions
96 Questions
89 Questions