Carrier 38CKC060 Air Conditioner "comfort zone problems" Questions

comfort zone fan- CZ161 won't turn on The fan won't turn on Remove front grill cover and spin the fan, if it spins the problem is most likely the on? off switch or the cord may be frayed, at the plug ...

...Comfort 3 zone thermostat I have a 3 zone thermostat with a Carrier comfort thermostat and HVAC system. Two of the 3 zones have blank readings for the set temperatures (hot and cold). When I go into ...

...comfort zone II. comfort zone II Thermostat shows a reading of 76 degrees. The heat is set for 68 deg. The furnace is still running even though house temp is 76 deg. What could be wrong? Is this an ...

...comfort zone thermostat which states "outside sensor error". Does this mean that the AC needs to be serviced or that the variable speed furnace/comfort zone system needs to be serviced? hello, check ...

...zone control. Both control centers, old & new, give the same error message. Help! You need to check the cable that connects the Comfort Control to the upper unit. This cable has four wires and ...

fan motor will not spin blades Is blade stuck? Remove grill cover and spin the blade to see if there is a mechanical problem. If OK then check the cord for a bad connection at the plug.

...Comfort Zone 2 flashing E2 My carrier comfort zone 2 thermostat keeps flashing E2 and is not cooling my house properly. Does anyone have any idea what this warning light means and how I can fix this ...

my air conditioner after reaching temp cuts out but then when it cuts back in runs freezing for a while before it warms again do i have a problem or is this normal? Check your filter, clean it, and ...

...comfort zone II (Zonecc (2,4,8)) Hey. Just bought my 1st house in May. My dad came to live with me. He has dementia. Feel sorry for me. haha so, the thermostat display is dead. i don't know what is ...

amana ultron 12 seer 2 yrs old compressor does not work blows cool air not cold is it a split system? majority of problems, lets say 95% occur during install, u may have a leak! A pinhole at that, but