General Electric WCVH6800J Front Load Washer "replace water inlet pipe" Questions

Ad

...:) if water is entering when the machine is off, saounds as if the water inlet valve is notoperating correctly and you would need to replace it.. its where you screw you inlet hoses to the

Ad

...pipe coming from the inlet valves and put the machine into cycle the flow of water should be full of the pipe and at mains water pressure, if this is not the case replace the inlet valves. Thanks ...

Ad

Question about Hotpoint Washing Machines

1 Answer

...power replace the water inlet valve. The whole valve must be replaced. They are inexpensive and easy to replace. Here is a link that should help ...

Question about Washing Machines

1 Answer

...inlet water pipes connected), it is possible that the hot water inlet valve is malfunctioning. You can test this by feeling if the hot water inlet pipe gets hot when the washer is supposed to be ...

Question about Maytag Washing Machines

1 Answer

..."quick connectors" that are sometimes used to screw on to the water pipes, can corrode over the internal hole, and prevent good flow, so replace with a proper washing machine valve, and TEE

Question about Fisher and Paykel Washing Machines

1 Answer

...OK. cold water only. You need to replace the "hot water inlet valve". If you have have cold and hot water at the pipes and only cold coming it the valve is bad. Replace with this part. The FixYa ...

Question about Washing Machines

1 Answer

Machine not filling with cold water replace the inlet valve Please check inlet valve is hamming during a filling water if yes please remove inlet pipe and clean fillter

Question about Washing Machines

1 Answer

...water that should not be there out and then replace the pipe). A wire is off the sensor (Take a look around and re-fit any loose wire). The sensor has actually failed and requires replacement. (A ...

hot water in no cold water inlet screens ok I don't know what you mean by (screens ok) an acute bend in the cold water pipe or you need to replace the water dual inlet valve eric

...replace the inlet valve please? switch off power remove top switch off water and remove hose. remove inside pipe from valve - usually held by just a spring clip remove electrical terminals valve is ...

Not finding what you are looking for?
General Electric WCVH6800J Front Load Washer Logo

180 questions posted

Ask a Question

Usually answered in minutes!

Top General Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Richard C Cohen
Richard C Cohen

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6195 Answers

Are you a General Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...