Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum "prime bissel cleaners pump" Questions

Ad

Question about Bissell Vacuums

1 Answer

...prime on the pump i have lost the prime on the pump on my bissell proheat 2x carpet cleaner how do i fix it Since I could not get any water or cleaning solution to squirt on the carpet when I pulled ...

Ad

Question about Bissell Vacuums

1 Answer

...cleaner lost pump prime Hi Jay! Sorry to hear your machine has lost prime. Here's a quick link to troubleshooting steps to assist you: ...

Ad

Question about Bissell Vacuums

2 Answers

...pump loses prime and will not work. If all that checks out then you are down replacing the pump, but usually when the pump goes out, you will have a short burst of water when you first turn it on and ...

...cleaners. I finally located the problem by switching tanks from one to the other. The small red seal on the bottom of one tank was bad[ tiny checks on ribbed part of seal] causing the unit to loose ...

prime pump in bissell carpet cleaner Turn off and unplug unit. Remove both tanks. Fill Solution tank and install it. Fill Heat Tank and install it. Plug unit in and turn on, wait one minute and engage

prime in pump if so should i fill pump i had this thing all apart and i now know evry inch of this matchine when i pull the triger it sometimes will spray for a sec.but thats it i also took the switch

Question about Bissell Vacuums

1 Answer

...pump loses prime, you just turn of the unit, turn it back on and wait about a minute before pulling the trigger. The pump establishes prime when you first turn it on, but you need to wait long enough ...

...pump starts to prime itself. If you have air in the system, it takes a little longer to prime. Allow the vacuum to run for 1 minute before attempting to pull the trigger. Then pull the trigger. If ...

...pump several times still no water coming out where you prime, could heater be clogged, containers are in right place, filter is clean, how to check for this model 1551 if clogged heater If there is ...

...prime the pump on a Bissel Pro Heat carpet cleaner? Remove recovery tank, put back in, making sure its sucurely pushed down,turn on power then wait about 10to15 seconds before turning on heat. this ...

Not finding what you are looking for?
Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum Logo

537 questions posted

Ask a Question

Usually answered in minutes!

Top Bissell Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Renee Knafel-Bullock

Level 3 Expert

404 Answers

Are you a Bissell Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...