plug the cleaner back in and turn on the switch. If the cleaner still does not run, then call 1-800-282-2886 for customer assistance this link below is the manual http://dl.owneriq.net/b/b7517422-db37
in overheating protection. If the motor becomes too hot, it may shut off automatically to prevent damage. In such cases, let the vacuum cleaner cool down for a while before trying to power it up again
...cleaner and it just stop, i checked voltage at wall, have 120. This is often caused by overheating and overheating is often caused by blocked filters. Wash the filters and let them dry naturally (do ...
...cleaner. Depending on the model and the country, the standard fuse is in the plug or it is the breaker. They do have an internal thermal fuse to protect against severe overheating. It is not ...
...cleaner quite working about two minutes into vacuuming? It just shuts off. I have the pet fur picker upper version Sounds like overheating of motor operating a thermal cut out ..Clean all filters you ...
...cleaner back in and push the on/off switch on . http://pdfstream.manualsonline.com/d/da19e1c3-0adc-1124-7d8f-e5c2845e6032.pdf The manual also suggests checking to see the plug is securely inserted ...
Question about Kenmore Vacuums
my Kenmore intuition canister vacuum cleaner shut down when the bad was full. replaced the bag, now the cleaner will not start Its all good now. The vacuum just started working. I think it got ...
Question about Riccar Vacuums
...of the back side of the main body (roughly one inch to the right of the left wheel) Using a pencil, paper clip or other pointed object, push the reset button in Plug vacuum cleaner in and resume
860 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
450 Questions