...work after all this cleaning today for about 3-4 minutes then brush stopped spinning suction is fine and works on all other options it actually has excellent suction even with the tiller not ...
Question about Hoover Vacuums
...brush was spinning.Brush spins but not easily.It spins then stops therefore burns the belt.How can i get the brush to spin around better Kristie, I would suggest taking the brush bearings at each end ...
...spinning. Took out the spin brush attachment - the main port that the attachment plugs into is not spinning. Is this repairable? Sometimes it can be the inside rod of the brush barrel has resonated ...
brush roller to see if it is spinning. Turn the vacuum over and turn it on. If the brush spins before it shuts off, you may need to check the bearings to see if any strings or hair has built up around
brush is not spinning? The carpet attachment brush is not spinning. The spin brush button when pressed is illuminated. Suction is fine. The brush is free of debris. But it is not spinning. I am having
spinning brush and clean all debris from the brush and most importantly from the ends of the brush. The ends of the brush usually have two holders (square?) that hold the brush in place on the vacuum.
...spinning the bar with your thumbs. Does the brush spin freely in your hands? It should spin completely around 4-5 times on each spin. If the brush will not spin, or if you feel any resistance to it ...
Question about Hoover Vacuums
...spinning, a replacement brush-block assembly may be needed. The brushes counter rotate and need each other to spin. If a single brush is falling out, the brush assembly is broken. If the whole brush ...
...sheered through by "motor arm" (not sure what to call it - just the opposite of the roller brush end). Motor arm is rough and sheers though the belts immediately. Can this part be replaced? ...
860 questions posted
Usually answered in minutes!
1,132 Questions
870 Questions
836 Questions
655 Questions
450 Questions