General Electric Adora GHDA670N Built-in Dishwasher "cancel drain" Questions

...cancel/drain mode... We have a Whirlpool Quiet partner II, about 4 yrs. old.. When I push the start button the cancel/drain cycle begins...will run in this mode for about 5 minutes then shuts ...

CANCEL/DRAIN button, also press and hold the ON/OFF button 2. When the LED above the CANCEL/DRAIN button illuminates and the beeping starts, release both buttons 3. Press the right CANCEL/DRAIN button

...it's not clogged. If there's no clog, try pressing the Cancel button; most dishwashers run the drain pump when the Cancel button is pressed. Check the dishwasher drain line, drain path and drain

...repeats the cycle over and over I hit the cancel drain button and it drained for 2 mins. NOW IT REPEATS THE CYCLE OVER AND OVER. open the door and turn it off that should cancel out the drain ...

CANCEL/DRAIN" button then press and hold the "ON/OFF" button 2. When the light above the "CANCEL/DRAIN" button illuminates and the beeping starts, release both buttons 3. Press the right "CANCEL/DRAIN

...cancel drain selection was pressed and drained. A regular wash cycle was started and the tech left. After the cycle ended and dried we checked the unit and found water still in the bottom, it had not ...

...cancel- reset pushed (manual drain). Suggestions? One of the reasons for motor not draining during normal cycle is the check valve is stuck. It is meant to return to normal during drain cycle but ...

cancel/drain. the green light came on and i could hear the dishwasher running but not hear the water draining out. Let it run the 2 minute cycle for cancel/drain opened the door and the water is still

...cancel drain but does not show 2 minutes in time remaining just a vertical dash. 2 hours later the heat dry light comes on. Two days ago, pressed normal cycle, washed and then stopped. Water still in ...

...maybe paused or canceled. The lit red button should say Cancel/Drain. If you already tried to press start and if it won't finish the cycle then try pressing the Cancel/Drain to drain and start