...Remove the back cover: The back cover of the C-801 is typically held in place with screws or a spring-loaded latch. Use a small screwdriver or coin to remove the screws or release the latch. Remove ...
Remove case back. Fit the adjustable case wrench into the slots on the case back. Tighten it down until it is snug. Be careful not to slip with this tool as it can scratch the case back of your watch.
remove back casing? My GAMETIME watch has a back which just pops off. Once in the battery compartment, you will see plastic disk, with a molded frame. This just simply pulls off, and is not secured in
...Remove the back plate by unscrewing the small screws. There is a tiny spring on the underneath of the back plate. It may be visible, or not. Make sure not to turn the watch upside down or the spring ...
Remove case back. Fit the adjustable case wrench into the slots on the case back. Tighten it down until it is snug. Be careful not to slip with this tool as it can scratch the case back of your watch.
...remove the back of the watch to get to the battery. If the watch is a water proof watch then the back is screwed on. After removing the back take care not to damage the gasket. If you cannot remove ...
22 questions posted
Usually answered in minutes!
260 Questions
254 Questions
95 Questions
77 Questions
