Crosley CAWC529JQ Top Load Washer "keep breaking motor couplings" Questions

Ad

Question about Whirlpool Washing Machines

1 Answer

keep the washer from spinning. If the switch is good then you either have a pump blockage issue or the coupling to the motor and tranny has broken. When the coupling breaks you will hear a grinding or

Ad

Question about Kenmore Washing Machines

1 Answer

...breaking the two little fingers on it and thus no spin action! check your motor coupling too,it is the rubber and plastic part between your motor and transmission. you would have to remove the ...

Ad

Question about Whirlpool Washing Machines

2 Answers

...motor will want to fall. Keep a firm steady hand under it to prevent damage to floor or motor. Look on the back of the motor and see if you see a little rubber disk with 6 holes. There is a three ...

Question about Kenmore Washing Machines

1 Answer

...out you may see a pile of black(or maybe even white) shavings right under the motor.The coupler keeps you from doing damage to the gearbox and breaks away first.It's a pretty easy repair if you ...

Question about Equator Washing Machines

1 Answer

...keep the machine from vibrating? LOUD NOISES IN washing MACHINE; LOT OF THINGS TO CHECK, THE BELT LOOSE OR WORN, THE CLUTCH, THE TRANNY, THE BEARINGS BOTH TUB SEAL AND BEARING, THE REAR DRUM BEARING, ...

Question about Whirlpool Washing Machines

1 Answer

...would spin and drain at the same time. Newer washers will allow the water to be pumped out first by keeping the spin pawl in check. A built-in pause allows the cent force to toss out the spin pawl ...

...keep on breaking the motor coupling can you help This is often a worn clutch or broken t-bearing support. If the t-bearing support or ball cracks and breaks or comes out of place the clutch ...

motor couplings are more resilient and resist breaking better, because the manufacturer added a steel grommet. If you have any questions about this repair, or if you need additional assistance, please

keep repairing this machine. on some washing machines, there is a coupling that goes between motor and the transmission. if the coupling is bad tub will not spin, get access to motor and check it out.

Question about Kenmore Washing Machines

1 Answer

...or clutch is bad ! the coupling is between motor and the transmission. on a lot of washers its rubber or hard plastic to keep from ruining appliance if it breaks.this is why washer will not

Not finding what you are looking for?
Crosley CAWC529JQ Top Load Washer Logo

100 questions posted

Ask a Question

Usually answered in minutes!

Top Crosley Washing Machines Experts

vince

Level 3 Expert

2530 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Crosley Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...