Bunn VPR Coffee Maker "3 silicone tubing" Questions

...silicone connector at end of the short copper tube stub under the the top plate. How can the water get from the reservoir to the coffee filter without a long dip tube? If you will bet the model and ...

...very hot water. the best way to slove this problem is to find about 1 in of silicon tube of 1/4 or 3/16 iner and put the new parts of tube directly on the bafle and put the original tube in the new ...

...3/8 inch inside diameter, buy silicon tube that matches it and with an outside diameter of 1/2 inch. Cut the tube to the correct length to replace the old one, massage it on to the metal pipe ends, ...

...coffee maker leaks water When making coffee our coffee maker leaks water from the bottom There are 3 seals in your unit that could cause your problem. there is a silicon seal right under the pour-in ...

3 year old baby gaggia which has a crack behind the water tank and therefore is leaking water from underneath with each use. i have tried to seal the crack with silicone but it only lasted a few days,

...silicone and steel washers are fine. However the reservoir (plastic tub) where it is sandwiched between the washers is cracked and brittle. I am trying to find a replacement reservoir. The number ...

...3- The frother circular chamber for steaming is not clean. There should be no milk deposits visible at all. 4- The silicone tube puling milk from the bottle is connected to the body of the frother ...

The machine has been running without problems for 3 years and now hot water was coming out very, very slowly when preparing a coffee. I have fully dismantled and cleaned the machine. I found in the ...