Bunn NHB Coffee Maker "fix carafe less makers" Questions

...carafe I think I have a fix for the lid. I need a couple people to send me their lid to see if my fix works. My fix does not involve any material destruction of the lid. I will send you the lid back ...

...carafe onto the counter regardless if use 6 cups or 10 cups of water or if I use a paper filter or not, How can I fix this. This is a high priority today ! Harry, check whether the sealing is done ...

...carafe fully to the back of the hotplate it makes this worse. OK, so now the fix, which worked for me. Find a small piece of plastic to glue to the top of the carafe lid. You just need a small dimple ...

...fix it? Coffee overflowing onto the counter is a common complaint found in response to many automatic drip coffee makers. The following are potential solutions that can be used to rule out "operator ...

...carafe and the basket is incorrect.) 8. Clean your machine with vinegar or as instructed by your user manual at least three times per year, more if your water supply is hard. A properly cleaned ...

...carafe and had my share of "bent" screens from being too quick when pressing. I finally learned that the slower I pressed the better the unit would survive and the better quality of coffee I'd get as ...

fix my lovely coffee pot. Not good. As I sit drinking my hot, weak coffee, preparing to go and buy my next coffee pot, I thought of others that are probably waking up to this same problem this morning

...is just over a year old. Obviously, my neglect and subsequent butter melting negates getting this fixed under any warranty. There is one thing you can try first. With the machine filled with water ...

...carafe until I could get the spring out. Then, I stretched the spring a bit. Cleaned everything, then put it all back together - no leaks!The extra length on the spring causes it to seat the washer ...

...carafe ?nook? tothe back of the drip outlet. The upper plastic portion should nowlift straight up out of the coffeemaker. With the coffeemaker upright, removethe four philips screws holding the ...