Rado Diastar Anatom Jubile watch "digital hand sync" Questions

...hand to the "50" (12 o'clock) position by pressing it repeatedly. Press the bottom left "Mode" button then use the "Forward" and top right "back" buttons to move both of the hands on the main display ...

...in at the time to sync and the digital display will go out, then spin the winder again if you want to display the digital features. I hope this helps, please post if it does, Maurice Chevalier- ...

...digital display Use the + button and - button to align the hour and minute hand to 12:00. Click on the T-button again. Congrats, you're done! Enjoy~Must see blog for all T-touch users ...

...mode button until only digital seconds are displaying.Hold both chrono buttons until you see the word sync on displayPress each chrono button until hour and minute hand is at 12:00Press mode ...

...Digital clock showing correct time. Hands 8 minutes slow even if I change time manually. You may need to recalibrate the hands. Sometimes the hands are out of sync with timekeeping. Go to the Casio ...

...digital and analog screens? There are instructions on here and in the tissot website. However in basic layman terms here goes... Press central button and hold for 5 seconds til 2nd beep heard. press ...

...sync with the digital clock. Can you help? Hi there.  Your hands are driven by the digital.  Please consider reviewing the instructions for setting at:  http://www.citizenwatch.com/If ...

...my analog hands are not in sync with the digital time which I was able to set accurately. Help please! just pull the crown out and turn the hands until the time shown is correct ,then press it back ...

...sync.The hands will face 1200. 4. Press either the upper (East) or lower (West) button to adjust the compass hands. They should both face 1200. 5. Press the middle button to get back to 'regular' ...