Fantom Drives 120 GB Hard Drive "remove case" Questions

...case. It has 4 screws to remove, 2 under the silver warranty voiding tape and 2 visable on the bottom side. Remove them, then use a flat screwdrive to pop the case open (gently). Then remove the ...

case together then "carefully"slide the metal case off. You must remove the 2 small screws hold the small PCB to the front of the drive and move the PCB out of the way while sliding the metal case off

...a rocstor storage ext. hard drive case with a Toshiba 160 gb in it. How do I remove the hard drive from the case? Not sure why you would want to, but unscrew the case unplug the hard drive and ...

...Remove them and the case can then be pulled apart. The controller board is screwed onto the bottom of the hard drive. Remove the screws and slide the board carefully off of the SATA connection and ...

...case. Remove any metal rings, watches or bracelets you may be wearing. Unplug the computer from the electrical outlet, then touch the metal casing to eliminate any static charge. You can also use an ...

...remove the case half, you will see a metal shield. There are two long Philips screws that go down through the metal shield, and hold the Harddrive assembly to the other half of the case cover. Remove ...

...case and remove/replace the hard drive inside. Peel back sticker on bottom. Unscrew Phillips-head screw that was hidden under sticker. Pull black part of case toward rear. Open top and bottom white ...

...case youll want to modify it so the usb cant drop back in again I would wire it and hot glue it from inside 1. Remove the rubber feet 2. remove the screws from where the rubber feet were. 3. Remove ...

...case to discharge static from your body 4 unplug old hard disk, then remove mounting screws from it. 5 remove old hard drive. 6 before handling new hard drive touch metal inside case again. (if you ...

How do I open the case to my fantom drive? remove "Warranty void if removed" sticker on bottom of case... unscrew screws...