Staples SPL-P100 Printing Calculator "feed print printer" Questions

...feed roller) and now there is an error on the print function. The claculator function works but the paper feed is out of commission. Is there a fix or does it need factory repair? it needs fine ...

...feed button. 1. If necessary, press on to turn the calculator on, and press P to turn the PRINT display indicator off. 2. Remove the printer compartment cover by placing a thumb on each of the lower ...

...feed through to the printing area If when you mash print and the paper doesn't move through to be printed on it may be because you don;t have the paper inserted properly or maybe someone jammed ...

...HR-8TM CALCULATOR There is a slot just in front of the printer 1. turn the power on 2. turn the switch to "PRINT" position 3. slot the paper in & press "FEED" 4. the paper should be able to feed ...

...print heads towards the front of the cash register. 4. Once done, close the printer arms and use the feed keys to advance the paper. 5. To attach the journal roll to the back of the winding wheel, ...

...a straight clean edge. Feed the paper into the slot in the back - make sure the paper is straight. Paper will go in about 1/4 inch. Push the feed button and the paper should feed through the

...feed the paper out. Of course do note that there is a selection "PRINT" is to use the calculator with printer function, "ON" is just to use the calculator without printer function. The paper will ...

...printer is off, feed the paper into the back portion of the opening, rolling from the top. Then turn the printer on, and hit the feed to advance the paper into the printer. Either method should solve ...

...to feed when I press the feed button, although the wheels and gears do turn. Try to load the paper again --- there is a slot just infront of the printer Make sure u turn the switch to "PRINT" ...

...feed button is pressed a percent sign is printed on tape. the printer of the unit has a problem... it is either an alignment is needed or the printer is dirty... you have to contact the nearest ...