Nortel Meridian 9417CW 2 Line phone "power dial tone" Questions

...Dial Tone After Power Failure About a day and a half after several power outages, we realized that we had not heard the phone ring --- at all. We lifted the handset and found no dial tone. Our local ...

...dial tone then problem is in handset or in base unit communication to handset. Try resetting power to base unit. Check manual for any re-initialization procedure. If the base unit is not receiving ...

...power interruption. It has been restored to default, incoming calls are fine, but I cannot dial out. There is a dial tone, but no response to the keypad in terms of the numbers. In the "old days" it ...

...This happened before and after repeatedly turning the power off, we got a dial tone. This doesn't seem to be working this time. Hey.. Did you check to see if the phone is registered correctly

...dial tone. This will indicate if your base unit is faulty.Check the power adapter to the base unit, make sure it is getting mains power.If the base unit has dual phone lines and if line 1 is only ...

...dial tone try to disconnect / reconnect the phone from power and make sure your phone line's connector cord is working. If there is no dial tone, then you may report this to your telephone ...

tone everything else is good no dial tone Try: Turn off power for the base. Turn off phone and take out batteries. Wait few seconds then put batteries back. Will help if you unplug and plug the cables

...power-/line-point in the house I gather you have the setting for tone and pulse set to tone? Also are you aware the ringing tone is generated by the phone company? When you dial a number and it ...