...roller brush will not turn? Vacuum has suction but the roller will not turn Try these steps: Check the button that turns off the roller brush to make sure you didn't press it by accident. Unplug the ...
roller brush of my dyson dc07 isn't turning... I tried to fixing and trying to figure out why the roller brush isn't turning but I can't even pull the roller brush completely off, the belt is tight ...
...brush roller and a silver shaft directly back from where the belt would ride. Remove the brush roller, place the new belt, Dirt Devil Style 5 ( see link below ) on to the shaft. Then insert the brush ...
Question about Euro-Pro Vacuums
...brush roller freezes and indicator light turns red turn on power, brush roller light comes on green and brush starts to roll for about 3 seconds and than brush freezes and light turns red try turning ...
...roller brush will not turn. The belt is not The roller brush will not turn. The belt is not broken! Hello, Sometimes the belt can stretch cause the roller to not turn. Also make sure the roller brush ...
...roller brush wont turn Cleaned out hair off brush but it still won't turn Hello, this is Ava with Think Crucial. There are a number of reasons why your brush roller has stopped moving. General ...
...brush roller. Turn the machine upside down, place the handle on the floor and the base on a counter. You will find several screws that hold on the hood, remove them. Turn the machine back to the ...
Question about Dyson Vacuums
...brush roller has stopped moving. General maintenance to your vacuum is crucial and will help it work at peak performance. First things first lets focus on the brush roller. Unplug the vacuum and turn ...
...brush roller. The sound is the clutch mechanism. That is a safety feature. It sounds like you have trapped the belt when you reinstalled it. If not, the brush roller bearings may be seized? Take it ...
125 questions posted
Usually answered in minutes!
4 Questions