Question about Adcom Audio Players & Recorders
...turn down the volume, it means that it starts before the volume control. And if the volume control has no effect then it is the stage after the control. Transistors, IC's, bias resistors or ceramic ...
...volume and when i turn the gain up and down its gets staticky(sp) and inconsistant. It gets the quietest at about half way up. I know its just channel 1 because i switched the speakers and it changed ...
turn the volume back down, this repeates the cycle. All you need to do, is remove the entire amp panel on the back, locate the "Jumper" (near the Volume Pot on the circuit board), straighten the pins,
...Turn off the power and rotate the volume knob appx 100-200 times back and forth...........power up and check. Use low continuous frequencies (synth music?) if possible as the lower the frequency is, ...
...volume, either - I typically run the amp's controls between 9 and 12 o'clock. The amp is only about 15 mos old, so I wouldn't think caps are going yet from age, unless they were crappy to start with. ...
...volume. Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on. Overloads can be from excessive periods of high ...
69 questions posted
Usually answered in minutes!
68 Questions
33 Questions
21 Questions
21 Questions
