DHD NTX-2009 Car Audio Amplifier "settings rca 1000" Questions

amp is getting power but im not getting sound from my subs, could I have fried the rca jack? Yes double check ur wireing you can fry port or wire from putting output to output try a different set of ...

...thing 1000@4 means 250w per ch. which means150w usable power.the mode switch is only to reduce rca cables,use 2ch mode if only 1 pair rca available,60hz is a bit low for this amp,90 would work

...1000 watt vs=3503 the power is on but there is no sound on the sub, when the led greed light is on that means that its on right, what color of light is the protect light The Protect light would ...

...1000 w amp protect red light stays on checked all wires even tried to simplfiy set up can you help? unplug the speakers and the RCA leads from the amp, if the red protection light is still lit then ...

...settings on this amp. these are the specs for the amp: RMS Power at 12.5V: 1 x 500W @ 4 ohms (<0.5% THD) 1 x 1000W @ 2 ohms (<1% THD) Dynamic Power at 14.4V (IHF-202): 1 x 850W @ 4 ohms 1 x 1500W @ 2 ...

...Settings On The Amp.... There Is Probably a Setting Turned All The Way To Max on it. Is There 2 Rca Cables Hooked to It ? Try Switching them around And Seeing if It Gets Better Or Un Plug one of them ...

connecting cd player to mixer I ran a rca cable to 1/4 jack from my cd player to the 1/4 input on the front of my peavey xr 8600 mixer. It sounds like your in a tunnel, or the vocals have been turned ...

...settings dials out of whack or are my switches in the wrong positions? Could this be a problem coming from my RCA wires possibly? thanks! This means your subwoofer is not wired properly. Remove the ...

...1000 wih alpine deck. Was told something about resetting it but don't know, please help? There is a number of things that can cause no sound from the amp. Check to make sure your RCA's are plugged in ...

1000 watt powerplant amp, which has a rca audio input for for front and rear. do i have to have 2 sets of leads coming out of my head unit to be able to run both front and rear or can i do it some way