Directed 1100d Car Audio Amplifier "8ohm speaker ohm amp" Questions

i have 4 8ohm speakers now the speakrs work in 2ohm how i can put the amp to work at 2 ohm the amp is a sonyxplod xm2002gtw It will only work in 4 ohm

...8ohm 900 watt max best way to hook up for loudest bass You will have to wire subs together for a 4 ohm load. Then bridge amp (1 channel). Look on amp speaker outs to see what leads to use to bridge. ...

...speakers in series. Positive to negative going to one speaker to the other creating an 8ohm so when you bridge the amp, that's if you are. You'll be running at 4ohms giving you a better cleaner ...

...ohm speakers and i am planning on bridging them would that be good to do. it depends on the amplifier your are going to run. if you bridge the tens together that will give you an 8ohm load. say the ...

...sure the speakers impedance is right for the amp's capacity. a 300w 8ohm speaker will draw 600w from a 4 ohm source. What amp and speakers are you running? are all connections tight? Hope this ...

...speaker which config will i get the most power out of the amp. Wired at 8ohm bridged or each voice coil on a channel. That amp wont run bridged at 2ohm rite. You are correct, the amp will not support ...

...ohm. 2 8ohm would become 4 ohm etc. if you are running 4 speakers in pair that are 8 ohm each the total together would be 2ohm. hope this helps. try to duplacate the conditions that was going the ...

...8ohm JL also a 15w6 JL audio & would like to know the best way to hook them up any help would be great thanks BATMAN It is capable of driving a 2 ohm load. It is a single channel amp, so bridging is ...

in series. well the 1100d directed amp is a mono block.... but yes tou would run them in series which is pos 2 neg on each speaker if there 4 ohm and if there 8ohm run it parrel pos 2 pos neg 2 neg...

...use more than one speaker you will have to use a series/parallel circuit to keep the ohms at 8ohm. You have to use ohms law for adding resistor in series and paralell. If more is needed please