Eclipse DA7232 Car Audio Amplifier "dual noise" Questions

noise drives me crazy how do i fix this I would try running the subs in parallel. Pos to Pos Dual Voice, Neg to Neg Dual Voice. Then Run + to + stereo - to - stereo on both channels. So you have + and

...noise in subs,tried 3 diff. areas for ground ,filter on rca and power wire 2 gauge cable with 800 watt pioneer mono one 800 watt dual voice coil sub rival series. You must break it down through a ...

...dual coil Kicker sub speaker and I am getting " engine noise " and the power is not enough for the speaker. I have experimented with wiring it both parellel and series with no great performance. Any ...

...Dual XPA2100 300 watt amp to the battery and connected ground to chassis of vehicle. Vehicle is 2004 Saturn Ion with battery located in trunk area. Amp does not power on, all connections are tight; ...

...Dual Channel Bridgable Bridgable RMS Power at 2 Ohms 400 W x 2 Performance Frequency Response 10 Hz - 50000 Hz Signal to Noise Ratio 102 dB THD at Rated RMS Power 0.01 % Crossover / Equalizer Bass ...

...Dual Channel Bridgable Bridgable RMS Power at 4 Ohms 100 W x 2 RMS Power at 2 Ohms 125 W x 2 Performance Frequency Response 10 Hz - 30000 Hz Signal to Noise Ratio 98 dB THD at Rated RMS Power 0.02 % ...

...noise as the amp turns off to deaf ears:( First of all you need to look at the specs on the amp and see what ohm load rating it runs at. for example (4 ohms @ 200watts) and check your configuration ...

...Noise Ratio >98dB Bass Boost +18db@45Hz Crossover (Butterworth) 55Hz - 5.5 KHz variable 12dB Fuse 30A x 3 Size 13.0''(L) x 8.0''(W) x 2 3/8''(H) and here's the sub system: Sony XS L120B5D ported ...

dual xdvd-1262 and it won't turn on. When the output connector is connected the unit makes a noise so it has power. All wires are connected, fuses are fine and everything else is hooked up. What could

...noise soon after we bought the car. I found the ground wire disconnected, the 20amp inline power fuse blown as well. I am in the process of getting another fuse and reconnecting the ground wire. will ...