Imperial IFS40 Deep Fryer "turn pilot" Questions

...pilot? You turn the valve knob to "Pilot", push it in, and light it (use a long butane lighter-it's easiest) and keep the button pushed in for 20 seconds-1 minute. If the pilot stays lit, turn the ...

...PILOT 1.Open the door. 2. Turn the thermostat OFF The thermostat is located behind the door. 3. Push the gas control valve knob and turn to OFF. Wait 5 minutes for unburned gas to vent. 4. Push and ...

...turn back on the pilot ? Most fryers have pilot lighting instructions on the inside of the door. If yours doesn't then find the gas valve, turn the knob to the pilot position, push in on the knob and ...

...the gas valve from pilot to on. Now turn the thermostat to desired temp and the burners will fire off and start heating. Hi, my fryer can start heating but the oil is not hot, why is it so? need ...

...The pilot light turn on ok and the burner too, but when I turn off the pilot at end of the day, the pilot light won't turn off like always. Any parts been changed? valve might be wearing

pilot won't lite. fryer is 6 months old. Did get pilot to lite once and as soon as we turned thermostat pilot went out. When you turned on the thermostat you required more millivolts from the system ...

Vulcan Deep Fryer Need to Light Pilot I was cleaning My Fryer and the Pilot went off...I turned and pushed in the pilot Knob and lit the pilot as soon as I release the knob the pilot turns off Iam I ...

...pilot not stay on when i turn thermostat on This problem occurs when the pilot generator is not producing enough millivolts. The pilot can be on, but as soon as you turn on the thermostat the ...

...Pilot is on but main burners don't ignite. Pilot looks normal & thermostat clicks when turned I have an imperial fryer. Pilot is on but main burners don't ignite. Pilot looks ...

...turn it clockwise to increase pilot,if that does not work the vent cap on the gas regulator on the back of the unit could be stopped up,remove that cap ,clean out or replace unit can operate without ...