Question about Oster Kitchen Appliances - Others
how much oil do I add to the fryer. is there a fill line the oil depends on the food item you intent to fry and the size and quantity. If there is only few items then use oil to just dip them in ...
Presto fry baby how much oil to use in the fry baby 05430? I just got one of these w/Instructions, Says fill oil to fill level line inside. Cooking oil or shortening. Never use more than (2) - 8 ...
...others, please see details below for pre-heating times: Non-Immersion Element (No element in the Oil): 25 to 30 Minutes Immersion Element (Element in the Oil): 7 to 10 Minutes Are you by any
...frying foods such as fish or chicken use the oil once. Do not filter oil over to reuse. Storing the oil in the refrigerator may extend the life of the oil, this should not be done ever. This process ...
Question about GE Kitchen Appliances - Others
The temp control tops out at 390. The oil doesn't get hot enough to make french fries You need a good external thermometer to check your oil temp. Everything fries at 350-375 degrees. Any hotter and ...
Question about Frymaster Dean Kitchen Appliances - Others
...fryers? I have three in a mobile unit and want to be able to move the trailer without draining the oil. Hi there!For open fryers, oil will still spill even with cover during transit because open ...
...frying otherwise the oil will overflow out of the basket. Is there something I can do to stop this from happening? check your hot oil level, it may be above the mark. also follow the maximum ...
...fresh, frozen. This is a 1,500 watt appliance, so it will deep fry 6 cups of fries in 6 cups of oil. It will do a very good job. It also depends on how brown you want them, just use the scoop to ...
Question about Cecilware Kitchen Appliances - Others
...sticking to the bottom of my fry baskets? After coating the food in batter slowly dip it into the oil allowing the item to get coated generously before dropping to the bottom of the fry
Question about Philips Kitchen Appliances - Others
not to see if it gets to temp. Water boils well below what the preset for oil for frying will be. You will literally boil your experiment out before you get there. That can fry electronics. Be CAREFUL
317 questions posted
Usually answered in minutes!
16 Questions
4 Questions
4 Questions