Imperial IFS40 Deep Fryer "hold down pilot light button" Questions

Hold the button down, and it should be in pilot position first. Once it's lit, then to ON. Does yours have a pilot or just ON? If you only have ON, then it should be turned to there... Susan @

hold down the light pilot button long enough for the sensors to heat up, to tell the pilot to light.... That's our number one complaint, and number one service call, and it's almost always the

...hold it down, put flame to pilot and release button when flame is self standing... Then turn to on position. If you have other issues, call the Vulcan company themselves, and they will help you ...

down light the pilot, normally located in between the burner tubes in the middle of the front of the fryer, hold the knob for 60 seconds, when you release the pilot should remain on. If it does rotate

...on my new SLG100 Anets deep fryer Did you hold the pilot light button down long enough? It takes between 20 seconds - 1 minute to properly heat the thermistor before you can turn the switch to

...hold the red button down for about a minute or two while it is lit, then turning it to on. If you tried this and it still wont stay lit then you can try replacing the thermocouple. For the relay the ...

...up it goes out no matter how long I hold it down Hi, The power pile thermocouple has gone bad and needs to be replaced.... that is what sends power back to the gas valve to hold it on... ...

...hold it down long enough. Try holding that button in longer first, then light it... It should work. If not, call us and we'll try to walk you through it.... Our service tech is Ray, and I'm ...

...hold the pilot button down for awhile, in order for the sensors to tell the pilot to lite....It takes some time. If you need help, call our service tech, Ray, at 888-542-5959 at Restaurant Equipment ...

...hold the pilot "lite" button down long enough for the fryer to light.  We normally instruct them to hold the pilot lite button in for some time, then light it, and after it lights, turn ...