Imperial IFS40 Deep Fryer "gas wont fire" Questions

...gas fryer burner wont light i changed the themostat and the thermopile.pilot lights but burner wont fire.i dont think the gas valve is opening. ideas????????? Check out the over heat is not shutting ...

...wont fire up The thermocouple or thermopile is your culprit. If it is not sending the correct millivolt signal to the main part of the gas valve telling it to open then, the burners will not light. ...

...wont fire up Ensure that the unit receives the gas pressure required on the nameplate. Check the thermopile, it should be free of soot or any dirt, and try to tighten all wiring

...wont fire the burners on. It worked last night, but not today for some reason. Where the pilot light is should be a small copper tube connected to a smaller copper tube that goes back to the main gas ...

...the vent hole (plastic plug, not the screw) on the regulator between your gas line & the back of the fryer. If it is plugged, it wont fire & the pilot will go out when t-stat makes. ...

wont lite when temp knob is turned up to 350 range pilot is lit Observe the thermostat when set to higher temp, you should hear a clicking sound as the mechanical contacts inside closes, at this point

gas is on but it just wont fire up? Dean Fryer I can tell you from my own experience with fryers, that they take quite some time to heat up....before lighting.... The probe takes some time to get hot,

gas fire wont stay lit gas fire lights for approx 15-20 minutes and then goes out. Can you please provide a solution or a reason The thermostat probably reached the set temp, but maybe the pilot lite ...

...wont lit up the fire.only the pilot works Check if there is sufficient gas supply as stated on the unit's nameplate. Check if there is no soot/ carbon build up on the thermopile for this will ...