Hifonics BX1000D Car Audio Amplifier "amp light goes rca" Questions

...the RCA wires in, the amp goes in protect mode. The light is not green eithe when the RCA wires are not hooked up. I don't know what to do... seems like the rca jacks are loose on the inside of the ...

...not for sale. unplug rca,disconnect spker turn on amp if light goes away start connecting with one rca and one spk wire and you will find the problem should go away '''''''make spk polarity is ...

...a quick solution, Take your RCA cable fully out of your car, Then wire it to the back of your head unit through the centre of your car straight to the amp, If still red light, you need new RCA ...

light your amp is faulty. Hopefully you have warranty I would buy a cheap pair of rca cables just to verify if yours are bad. .A thumbs up would be greatly appreciated if this answer is helpful to you

amp(jensen4100,blue).red protec light comes on when starting car then goes out and is not followed up by the green protec light .green one never comes on. also need to know what set of RCA teminals on

AMP TO READ DIAGNOSTIC The diagnostic light, for this particular model, means that there is either a short circuit on the loudspeaker leads or there is an internal amplifier fault that is causing a DC

light was on but just cracky sound. When turned up, the amp goes into protect mode. I removed the stereo a pioneer avic d3 everything was good. I unhooked one rca, it touched nothing, sound came back,

amp goes into 'protect' mode (red light) and there is no power to my subs. Could this be a fuse or is the amp done for. Sometimes i goes into protection when the amp is overloading with power.. Or the

amp will turn on to protection then it goes off and the green light comes on but its not putting out sound. it will go from protect to green but no sound at all. is it internal? i have good connection

...light comes on. I have the speaker wires hooked up to the amp, but no the subs. The only things connected are the power and the Rca connections. However, the protection light only comes on after I ...